Training Articles

In addition to continually striving to improve and create new products for the metal fabricating industry, Centricut is also dedicated to providing your staff with technical support and training to make the most of your equipment. Below you will find our Online Lessons by Dave Cook, Centricut Technical Services Engineer. Check back on a regular basis for new lessons to help you improve your productivity. Our articles are intended for internal use within your shop only. All articles are ©Copyright 2000-2005, Centricut.

 

Informational Articles & Guidelines

• Torch Cooling Systems for Plasma Arc Cutting
• Electrode Wear in Air & Oxygen Plasma
• Ten Common Mistakes to Avoid
• Mechanized Plasma System Maintenance
• Upgrading and Retrofitting PAC Machines
• Plasma Arc Cutting - Cut Quality Problems
• Solving PAC Cut Quality Problems - Dimensional Inaccuracies
• Troubleshooting PAC Systems - Starting Problems
• Solving PAC Cut Quality Problems- Plasma Cutting Small Holes and Intricate Shapes

How to Articles

• Tips and Techniques for Mechanized Plasma Cutting
• Illustrated Guide to Plasma Gas Selection - How to Choose the Best Gases
• Torch Height Control for Plasma Cutting
• Cost of Operation in Mechanized Plasma Cutting
• Troubleshooting PAC Cooling Systems
• Troubleshooting PAC Systems: Parts Life Problems
• Troubleshooting PAC Systems: How to Nullify Noise

PDF Files
(requires Adobe Acrobat Reader)

• Training Articles Journal